To stop the printing operation, detach the Disc Tray from the machine, then close the Inner Cover. To keep the print quality at an optimal level, it is recommended to stop printing discs once every ten discs when printing more than ten discs continuously.Always close the Inner Cover after printing on printable discs.Always use the supplied 3.15 inches / 8 cm Disc Adapter when printing on 3.15 inches / 8 cm printable discs.The Disc Tray may become dirty if software other than CD-LabelPrint or Easy-PhotoPrint EX is used.If the reflectors on the Disc Tray become dirty, wipe the reflector clean with a soft, dry cloth, taking care not to scratch the plate. The machine may not be able to recognize loading of the printable disc, or printing may become misaligned. Do not get dirt or scratches on the reflectors of the Disc Tray.Doing so may damage the machine, the Disc Tray, or the disc. Do not remove the Disc Tray while printing on printable discs.Do not attach the Disc Tray while the machine is in operation.Do not touch the printing surface until the ink has dried. Do not use hairdryers or expose the disc to direct sunlight to dry the ink. After printing, allow the printing surface of the disc to dry naturally.Loading discs in a dirty Disc Tray may scratch the recording surface of the discs. Remove any dirt from the Disc Tray before placing printable discs on the Disc Tray.Do not touch either the label surface (printing surface) or recording surface. Hold the printable discs by their edges. Doing so will make data recorded on discs unreadable.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |